[ Log In ]
[ Register ]

Question #: 14315

Question: I BOUGHT A 2.0 AND NEED HELP PUTING IT TOGATHER ELC

Current Solution

If you purchased a machine that was used and you don't know which mode it is, you can browse our models here:
https://www.buildyourcnc.com/Item/milling

Respond:

Other Possible Solutions to this Question

  • I BOUGHT A 2.0 AND NEED HELP PUTING IT TOGATHER ELC

    If you purchased a machine that was used and you don't know which mode it is, you can browse our models here:
    https://www.buildyourcnc.com/Item/milling

    Click the link to add information to this solution:
    I BOUGHT A 2.0 AND NEED HELP PUTING IT TOGATHER ELC

  • I BOUGHT A 2.0 AND NEED HELP PUTING IT TOGATHER ELC

    If you purchased a machine that was used and you don't know which mode it is, you can browse our models here:
    https://www.buildyourcnc.com/Item/milling

    Click the link to add information to this solution:
    I BOUGHT A 2.0 AND NEED HELP PUTING IT TOGATHER ELC

  • I BOUGHT A 2.0 AND NEED HELP PUTING IT TOGATHER ELC

    Hi, can you explain which 2.00 product? Thanks.

    Click the link to add information to this solution:
    I BOUGHT A 2.0 AND NEED HELP PUTING IT TOGATHER ELC

  • I BOUGHT A 2.0 AND NEED HELP PUTING IT TOGATHER ELC

    Hi, can you explain which 2.00 product? Thanks.

    Click the link to add information to this solution:
    I BOUGHT A 2.0 AND NEED HELP PUTING IT TOGATHER ELC

  • I bought a CNC router used and I need help retrofitting the electronics.

    Yes, you can send your electronics to us for repair, or retrofit to work with either Mach3, Mach4 or LinuxCNC. You can send us an email at customerService@buildyourcnc.com to set up your appointment.

    Some of the types of CNC electronics we will consider.

    - We will work on electronics from other manufacturers as long as you are ok with the Mach3, Mach4 or LinuxCNC control software for your CNC machine or CNC router.

    - We will repair or retrofit used CNC electronics.

    - Some customers find that electronics are overwhelming to put together so we will finish these electronics wiring and assembly for you.

    The cost for these includes labor cost for the time it takes to finish the CNC electronics repair or retrofit and for any parts that need to be replaced or added.

    Here is an example of CNC electronics that we worked on for a customer:



    This is the type of response that you can expect to receive after the CNC electronics are repaired or retrofitted to work under Mach3, Mach4 or LinuxCNC. You can see the entire work, which also shows the time involved. We also show what we were able to accomplish at the beginning of the video.

    Click the link to add information to this solution:
    I bought a CNC router used and I need help retrofitting the electronics.

  • I just bought a 3040 800 watt cnc. What electronics do i need to buy to run it?

    If you do not have electronics for your CNC, you will need stepper motors (or servos) that will fit your torque requirements, drivers for the motors, a power supply, applicable wires, and an interface board for computer communication. We sell electronic combo kits here https://buildyourcnc.com/electronicscombo.aspx

    Click the link to add information to this solution:
    I just bought a 3040 800 watt cnc. What electronics do i need to buy to run it?

  • I need a resource, we bought 2 redfly systems and mach 4, We put one motor on for the x axis but cannot get it move. Can you direct us to some tutorial?

    Could you specify which breakout board you have? If you have a parallel port version, be sure that you have purchased the "legacy" parallel port version from Mach4. If this proves not to be the problem, please feel free to email us directly at techsuport@buildyourcnc.com or call 281-815-7701 for troubleshooting instructions.

    Click the link to add information to this solution:
    I need a resource, we bought 2 redfly systems and mach 4, We put one motor on for the x axis but cannot get it move. Can you direct us to some tutorial?

  • I bought your 3 axis combo and need to know what name brand is the motors and their ounces and the drivers

    Surely you know the brand motors you sold me?

    Click the link to add information to this solution:
    I bought your 3 axis combo and need to know what name brand is the motors and their ounces and the drivers

  • I bought a 2.2 Kw spindle and YL620 A-2 from you and am getting an ER 4 message. How do I fix it?

    If the VFD is presenting an ER 4 error, the VFD is most likely damaged. The VFD will either need to be serviced or you will need to purchase another VFD. The latter is probably the less expensive option, unfortunately.

    Additional Information:


    Additional Information:
    i had that error and found a power in wire touching and fixed and started and all was good.
    good luck

    Additional Information:
    i had that error and found a power in wire touching and fixed and started and all was good.
    good luck

    Additional Information:
    i had that error and found a power in wire touching and fixed and started and all was good.
    good luck

    Additional Information:
    i had that error and found a power in wire touching and fixed and started and all was good.
    good luck

    Click the link to add information to this solution:
    I bought a 2.2 Kw spindle and YL620 A-2 from you and am getting an ER 4 message. How do I fix it?

  • ok I Build my CNC machine table and now need a complete set for motor and software how you can help me

    Yes, I will need to know more specifics of the machine so I can recommend the correct electronics.

    Click the link to add information to this solution:
    ok I Build my CNC machine table and now need a complete set for motor and software how you can help me

  • I bought an used machine that need work how can I find the model. The owner said, he used this site for parts and manual.

    If you purchased a machine that was used and you don't know which mode it is, you can browse our models here:
    https://www.buildyourcnc.com/Item/milling

    Click the link to add information to this solution:
    I bought an used machine that need work how can I find the model. The owner said, he used this site for parts and manual.

  • I need my spindle and cnc electronics repaired. How can I fix it?

    Yes, you can send your electronics to us for repair, or retrofit to work with either Mach3, Mach4 or LinuxCNC. You can send us an email at customerService@buildyourcnc.com to set up your appointment.

    Some of the types of CNC electronics we will consider.

    - We will work on electronics from other manufacturers as long as you are ok with the Mach3, Mach4 or LinuxCNC control software for your CNC machine or CNC router.

    - We will repair or retrofit used CNC electronics.

    - Some customers find that electronics are overwhelming to put together so we will finish these electronics wiring and assembly for you.

    The cost for these includes labor cost for the time it takes to finish the CNC electronics repair or retrofit and for any parts that need to be replaced or added.

    Here is an example of CNC electronics that we worked on for a customer:



    This is the type of response that you can expect to receive after the CNC electronics are repaired or retrofitted to work under Mach3, Mach4 or LinuxCNC. You can see the entire work, which also shows the time involved. We also show what we were able to accomplish at the beginning of the video.

    Click the link to add information to this solution:
    I need my spindle and cnc electronics repaired. How can I fix it?

  • I need help choosing the appropriate machine...engraving wood products and cutting sheet aluminum panels.

    For in-depth information please call 281-815-7701 to speak to a salesman or email sales@buildyourcnc.com

    Click the link to add information to this solution:
    I need help choosing the appropriate machine...engraving wood products and cutting sheet aluminum panels.

  • I BOUGHT YOUR BOOK AND WAS HOPEING IT HAD PLANS OR DIMENTIONS ON HOW TO BUILD A CNC HOLD 4X8 SHEET OF PLY. WILL THE IN SCALE UP?

    BYCNC Response:
    The book build was intended to be 20 inches x 40 inches. Larger machines were designed after the book build was introduced so customers would have the option to go bigger than what the book offered. Check out our larger machines on the website as the machines sizes range from 1 foot x 3 feet all the way up to 6 feet x 12+ feet.

    User Response:
    I'm not wanting to spend $3,000+ on a machine, I want to build one that will do a 4x8 sheet of wood. Will the plans in the book scale up?

    BYCNC Response:
    It is possible to scale the book build up, but the rigidity of the gantry would be questionable at that span, even if the height of the gantry structure were to be increased. The gantry design would need to be modified to become a box shape rather than a flat configuration. The kits on the site were design for those wanting a larger machine.

    Click the link to add information to this solution:
    I BOUGHT YOUR BOOK AND WAS HOPEING IT HAD PLANS OR DIMENTIONS ON HOW TO BUILD A CNC HOLD 4X8 SHEET OF PLY. WILL THE IN SCALE UP?

  • I need a water connection fitting for 2.2 water cooled router can you help me

    Yes, we can provide tube fittings for a water cooled spindle. Call us between 9:00am to 5:00pm Cental time and we will help you get this product.

    Click the link to add information to this solution:
    I need a water connection fitting for 2.2 water cooled router can you help me

  • I have purchased cable carrier chain and would like to know if you could send me a copy of that order as I need to purchase extra lengths of the links I bought. Thanks

    If you were logged in when you made the purchase, you can click the "My Account" link at the top of any page on this website and see all of your orders, order line items (with direct links to these items), and shipment information.

    Here is a link to the "My Account" page for your convenience:
    https://www.buildyourcnc.com/CustomerInfo.aspx

    I did not see your username on your internal customer record, so I added this username and you should be able to see the information in the "My Account" page.

    Additional Information:
    I just tested your accounts page and the cable carrier links are in there. Thanks and please let me know if you need further assistance.

    Click the link to add information to this solution:
    I have purchased cable carrier chain and would like to know if you could send me a copy of that order as I need to purchase extra lengths of the links I bought. Thanks

  • WHAT DOES THE GREENBULL KIT INCLUDE AND DO I NEED TO INCLUDE?

    The greenBull 4X comes with all of the components and electronics to assemble the gantry of the machine. You will need to build the table. We provide the rails and roller chain for the X-axis (along the length of the table for full 8 feet of travel). You will need to provide some wire to connect the electronics and a computer to run the machine. You will also need to purchase the software that you will need to run the machine that matches how you will apply the machine. We suggest the mach3 control program. The CAM program is up to you as there are many options out there.

    Click the link to add information to this solution:
    WHAT DOES THE GREENBULL KIT INCLUDE AND DO I NEED TO INCLUDE?

  • I bought a used cnc router. Can you make the electronics work?

    Yes, you can send your electronics to us for repair, or retrofit to work with either Mach3, Mach4 or LinuxCNC. You can send us an email at customerService@buildyourcnc.com to set up your appointment.

    Some of the types of CNC electronics we will consider.

    - We will work on electronics from other manufacturers as long as you are ok with the Mach3, Mach4 or LinuxCNC control software for your CNC machine or CNC router.

    - We will repair or retrofit used CNC electronics.

    - Some customers find that electronics are overwhelming to put together so we will finish these electronics wiring and assembly for you.

    The cost for these includes labor cost for the time it takes to finish the CNC electronics repair or retrofit and for any parts that need to be replaced or added.

    Here is an example of CNC electronics that we worked on for a customer:



    This is the type of response that you can expect to receive after the CNC electronics are repaired or retrofitted to work under Mach3, Mach4 or LinuxCNC. You can see the entire work, which also shows the time involved. We also show what we were able to accomplish at the beginning of the video.

    Click the link to add information to this solution:
    I bought a used cnc router. Can you make the electronics work?

  • I bought your book and was hopeing it had plans or dimentions on how to build a cnc to hold a 4x8 sheet of ply. Will the CNC in the book scale up?

    BYCNC Response:
    The book build was intended to be 20 inches x 40 inches. Larger machines were designed after the book build was introduced so customers would have the option to go bigger than what the book offered. Check out our larger machines on the website as the machines sizes range from 1 foot x 3 feet all the way up to 6 feet x 12+ feet.

    User Response:
    I'm not wanting to spend $3,000+ on a machine, I want to build one that will do a 4x8 sheet of wood. Will the plans in the book scale up?

    BYCNC Response:
    It is possible to scale the book build up, but the rigidity of the gantry would be questionable at that span, even if the height of the gantry structure were to be increased. The gantry design would need to be modified to become a box shape rather than a flat configuration. The kits on the site were design for those wanting a larger machine.

    Click the link to add information to this solution:
    I bought your book and was hopeing it had plans or dimentions on how to build a cnc to hold a 4x8 sheet of ply. Will the CNC in the book scale up?

Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.