[ Log In ]
[ Register ]
NEW: CNC Router PLANS Available for all of our Newest CNC Models!! Click here to "Design Your CNC".

Question #: 13950

Question: What is the recommended unit or brand of CPU cooling system for the 2.2 kw spindle on the Fabricator Pro machine

Current Solution

There really isn't any specific brand. We purchase the components in a disparate fashion from China. I will product a video today that shows all of the components that we use and also offer the components on the website.

From the upcoming video, you will be able to identify the parts is you feel you want to search for these components yourself.

Respond:

Other Possible Solutions to this Question

  • Is there a recommended cooling system for purchase that can be used with your 2.2 kW water cooled spindles?

    A standard water pump like this one will work: https://www.buildyourcnc.com/item/pneumatic-hydraulic-water-pump-370-Gallons-Per-Hour-220v-110v

    You will also need silicone tubing at 1/4" ID and 3/8" OD to connect from the pump to the spindle: https://www.buildyourcnc.com/Item/pneumatic-hydraulic-silicone-tubing

    And a bucket to hold the water.

    You may also consider CPU cooling systems which can actually be fastened to the back of the gantry. We do this for the Fabricator Pro machine. The CPU cooling I would recommend is a small pump and cylinder with a heat sink, or a small radiator.

    Click the link to respond:
    Is there a recommended cooling system for purchase that can be used with your 2.2 kW water cooled spindles?

  • Is there a recommended break in process for a 2.2kw water cooled spindle?

    A break in process, I'm guessing means if the spindle needs to be turned off for some reason? If so, then no. The water cooled spindle can be run constantly. We run our spindle for very long periods of time.

    Click the link to respond:
    Is there a recommended break in process for a 2.2kw water cooled spindle?

  • on the 2.2Kw water cooled spindle, what is the cooling port thread type and size?

    It is an M8 metric size on the port going into the spindle, and a 1/4" compression on the other side.

    Is the M8 port a M8x1.25 or M8x1?

    If you are referring to the book build, use a chamfer bit that is large enough to create a chamfer for most of the edge of the 3/4" thickness of the board, but still has a sliver of space for the bearing on which to ride.

    Additional Information:
    Mine is M8x1mm. I replaced the stock fitting with a brass hose barb and used "steel wire reinforced vacuum hose" with a 1/4" ID because it resists kinking and collapsing.

    Click the link to respond:
    on the 2.2Kw water cooled spindle, what is the cooling port thread type and size?

  • HI, I HAVE INTENTION OF PURCHASING YOUR 1/2 INCH PRECISION LEAD SCREW SET TO BUILD MY CNC MACHINE, COULD THE SCHEMATIC DIMENSION ANTI-BACKLASH NUT, BEARING FOR AND SHIM? ALSO IS 2.2KW SPINDLE ABLE MILL ALUMINUM WHAT ACCURACY?

    BYCNC response:

    Milling aluminum is no problem with our machines.

    Here is a video we recently did with our 4'x8' machine. The aluminum piece is about 1/4" thick: https://buildyourcnc.com/tutorials/tutorial-greenbull-aluminum-cutting

    The accuracy you will see from our our 2.2kW spindle is entirely dependent on the precision of your build, so it's not possible to say what level of accuracy you can achieve without an examination of the complete system. However, our spindles have a runout of less than .0001 in, which includes the collets that we sell. If you use a collet from another manufacturer, we cannot guarantee this TIR (Total Indicated Runout) dimension.

    For the dimension drawing of the anti-backlash nut, please contact us directly by phone or email to techsupport@buildyourcnc.com

    User response:
    I have emailed waiting for your reply.

    User response:
    Hi, I am still waiting for your email reply.

    BYCNC response:
    Your email has been sent.

    Click the link to respond:
    HI, I HAVE INTENTION OF PURCHASING YOUR 1/2 INCH PRECISION LEAD SCREW SET TO BUILD MY CNC MACHINE, COULD THE SCHEMATIC DIMENSION ANTI-BACKLASH NUT, BEARING FOR AND SHIM? ALSO IS 2.2KW SPINDLE ABLE MILL ALUMINUM WHAT ACCURACY?

  • HI, I HAVE INTENTION OF PURCHASING YOUR 1/2 INCH PRECISION LEAD SCREW SET TO BUILD MY CNC MACHINE, COULD THE SCHEMATIC DIMENSION ANTI-BACKLASH NUT, BEARING FOR AND SHIM? ALSO IS 2.2KW SPINDLE ABLE MILL ALUMINUM WHAT ACCURACY?

    BYCNC response:

    Milling aluminum is no problem with our machines.

    Here is a video we recently did with our 4'x8' machine. The aluminum piece is about 1/4" thick: https://buildyourcnc.com/tutorials/tutorial-greenbull-aluminum-cutting

    The accuracy you will see from our our 2.2kW spindle is entirely dependent on the precision of your build, so it's not possible to say what level of accuracy you can achieve without an examination of the complete system. However, our spindles have a runout of less than .0001 in, which includes the collets that we sell. If you use a collet from another manufacturer, we cannot guarantee this TIR (Total Indicated Runout) dimension.

    For the dimension drawing of the anti-backlash nut, please contact us directly by phone or email to techsupport@buildyourcnc.com

    User response:
    I have emailed waiting for your reply.

    User response:
    Hi, I am still waiting for your email reply.

    BYCNC response:
    Your email has been sent.

    Click the link to respond:
    HI, I HAVE INTENTION OF PURCHASING YOUR 1/2 INCH PRECISION LEAD SCREW SET TO BUILD MY CNC MACHINE, COULD THE SCHEMATIC DIMENSION ANTI-BACKLASH NUT, BEARING FOR AND SHIM? ALSO IS 2.2KW SPINDLE ABLE MILL ALUMINUM WHAT ACCURACY?

  • What kind of machine is recommended for machining composites?

    Any of our machines can cut composites. The machine selection would be the performance of cutting the composites. The greenBull will have the best performance due to it's increased rigidity. The feedrate, depth per pass and finishing passes will need to be adjusted for the machine that is being used to cut the composites. For example, the greenBull CNC machine with the 2.2 kW spindle will be able to cut deeper per pass with a faster feedrate than the blackFoot CNC machine.

    Click the link to respond:
    What kind of machine is recommended for machining composites?

  • Fabricator Pro 4x8 plans, electronics, hardware and mechanical components....is this a wood gantry machine? What all is not included?

    There really isn't any specific brand. We purchase the components in a disparate fashion from China. I will product a video today that shows all of the components that we use and also offer the components on the website.

    From the upcoming video, you will be able to identify the parts is you feel you want to search for these components yourself.

    Click the link to respond:
    Fabricator Pro 4x8 plans, electronics, hardware and mechanical components....is this a wood gantry machine? What all is not included?

  • What brand is the 2.2 kW spindle? Same for the VFD. Thanks.

    Spindles are generally covered up to 1 year after date of purchase. We do not repair them in house, but we do work with our manufacturer to replace defective units. Generally if you have a defective unit covered under warranty, we will issue a replacement.

    Click the link to respond:
    What brand is the 2.2 kW spindle? Same for the VFD. Thanks.

  • What kind of cooling system should we set up for the Blacktooth laser cutter laser tube? Can tap water be used? Is water temperature critical?

    The blackTooth's 40 watt laser tube can be cooled with simple tap water. A bit of anti-freeze keeps the tap water clean and free of algae. The cooler the water, the better output you will get from the laser. A great source of information can be found here: http://www.buildyourtools.com/phpBB3/viewtopic.php?f=8&t=3452

    Click the link to respond:
    What kind of cooling system should we set up for the Blacktooth laser cutter laser tube? Can tap water be used? Is water temperature critical?

  • Do you have a model of the Fabricator pro that can be inclined line the lean? I have seen a few other machines on the market like this. Can we use Mach4 with the fabricator pro

    Yes, you can use Mach4 wtih the Fabricator Pro CNC machine.

    We have not designed a metal machine like the Fabricator Pro to lean more in the vertical orientation. Unfortunately, we haven't gotten any requests for that style of machine, and the greenLean, although a great machine and space saver, has not been our best seller.

    If we get more interest in this type of machine, we would have no problem designing a machine like this.

    Click the link to respond:
    Do you have a model of the Fabricator pro that can be inclined line the lean? I have seen a few other machines on the market like this. Can we use Mach4 with the fabricator pro

  • Hello what is the thread size of the water cooling fittings on the 2.2kw spindle? I am wondering if I can replace the fittings with standard pc liquid cooling fittings, which are G1/4".

    They do have a similar looking thread as the G1/4”, but I will confirm in the morning. We use the G1/4” on the pump and radiator so it will be easy to determine this fit when I get into the office.

    Additional Information:
    Another FAQ says it is an M8, but I will confirm.

    Additional Information:
    These are M8x1 thread. I was able to find M8x1 3/8 barb fittings on Ebay. I plan to drill and tap my spindle to G1/4 though.

    Click the link to respond:
    Hello what is the thread size of the water cooling fittings on the 2.2kw spindle? I am wondering if I can replace the fittings with standard pc liquid cooling fittings, which are G1/4".

  • Do you sell the cooling solution for the liquid cooled spindle 2.2kw.

    We are going to add a cooling solution very soon to the website. I am awaiting inventory of Fan and Radiators.

    The cooling units that we will be offering are the ones shown in the two pictures here:
    https://www.buildyourcnc.com/images/greenbullv2-2-800.JPG
    https://www.buildyourcnc.com/images/greenbullv2-4-800.JPG

    The fan/radiator is covered up a little bit in the first picture by the vacuum hose.

    Click the link to respond:
    Do you sell the cooling solution for the liquid cooled spindle 2.2kw.

  • Hi, I have intention of purchasing your 1/2 inch precision lead screw set to build my CNC machine, could I have the schematic dimension of your 1/2 inch anti-backlash nut, bearing for the lead screw and the shim? Also is your 2.2kW spindle able to mill Aluminum and what is the accuracy?

    BYCNC response:

    Milling aluminum is no problem with our machines.

    Here is a video we recently did with our 4'x8' machine. The aluminum piece is about 1/4" thick: https://buildyourcnc.com/tutorials/tutorial-greenbull-aluminum-cutting

    The accuracy you will see from our our 2.2kW spindle is entirely dependent on the precision of your build, so it's not possible to say what level of accuracy you can achieve without an examination of the complete system. However, our spindles have a runout of less than .0001 in, which includes the collets that we sell. If you use a collet from another manufacturer, we cannot guarantee this TIR (Total Indicated Runout) dimension.

    For the dimension drawing of the anti-backlash nut, please contact us directly by phone or email to techsupport@buildyourcnc.com

    User response:
    I have emailed waiting for your reply.

    User response:
    Hi, I am still waiting for your email reply.

    BYCNC response:
    Your email has been sent.

    Click the link to respond:
    Hi, I have intention of purchasing your 1/2 inch precision lead screw set to build my CNC machine, could I have the schematic dimension of your 1/2 inch anti-backlash nut, bearing for the lead screw and the shim? Also is your 2.2kW spindle able to mill Aluminum and what is the accuracy?

  • While motor tuning what are the recommended steps per inch, velocity, and acceleration for the GreenBull CNC?

    In the customer service live, just enter "motor tuning" and it will give you a list of all the recommended or default settings for our machines. However the acceleration and velocity for the greenBull(other machines) will be an actual determination on your trials. You will want the highest possible acceleration and velocity without the motors stalling, so you can do increments of ten to be on the safe side, if it is too slow try increments of 25.

    The steps per inch is dependent on the microstepping:
    Steps/Inch for the x and y
    Steps = 200 motor steps per revolution x 16 microsteps = 3200 steps
    Inches = sprocket number of teeth x pitch of the sprocket = 14 x .25" = 3.5 inches
    steps/inch = 3200 / 3.5 = 914.28
    This is really a starting point. You will then need to use the mach3 calibration function to get the perfect steps/inch value. Use as long a measurement as possible when calibrating.

    Velocity:
    Start with a value of 1000 ipm. Increase this value with a relatively low acceleration at about 10. You will notice at a particular velocity that it will stall. This is your stall velocity. I would take the stall velocity and reduce it by about 30% to 50% which should give you a good final safe velocity.

    Acceleration:
    Once the velocity is found, raise the acceleration until it start to stall at a low velocity. Reduce the acceleration by about the same percentage to stick with a safe acceleration.

    The acceleration is mostly dependent on torque (current) and the top speed is dependent on the amount of voltage.

    Give some tests with all of the axes running at the same time. If you notice and stalling, reduce velocities and acceleration depending on when the stall happens (top end, or acceleration curve).


    X-axis
    “CW8060 (6.0A) Driver”
    Set to 5.43A, 1/16 Microstep
    Dipswitches: 01100110 (“0”=down, “1”=up)
    Mach3 Motor Tuning: 914.29 steps/in
    Y-axis
    “CW8060 (6.0A) Driver”
    Set to 5.43A, 1/16 Microstep
    Dipswitches: 01100110
    Mach3 Motor Tuning: 914.29 steps/in
    Z-axis
    “CW8060 (6.0A) Driver”
    Set to 5.43A, 1/4 Microstep
    Dipswitches: 01100100
    Mach3 Motor Tuning: 1600 steps/in

    Additional Information:


    Additional Information:


    Additional Information:
    4th axis


    Additional Information:

    Click the link to respond:
    While motor tuning what are the recommended steps per inch, velocity, and acceleration for the GreenBull CNC?

  • what is the recommended firmware for the awc708c laser controller? I see this download on the Sinjoe site: AWC708 Lite Update Firmware 160901L1

    We have not had any issues with stock firmware on the AWC708lite. Upgrading the firmware will be at your own risk. We can contact our supplier and see if they can provide a suggestion for updating firmware. Contact customerservice@buildyourcnc.com to inquire with a person who can help.

    Additional Information:
    Working area setting

    Additional Information:
    Working area setting

    Click the link to respond:
    what is the recommended firmware for the awc708c laser controller? I see this download on the Sinjoe site: AWC708 Lite Update Firmware 160901L1

  • Your 2.2kw spindle w/inverter is out of stock for 110v, do you anticipate on offering these soon?

    We may deprecate these units as we had too many issues with them.

    Click the link to respond:
    Your 2.2kw spindle w/inverter is out of stock for 110v, do you anticipate on offering these soon?

  • BUILDING ONE OF YOUR GREENBULL 6X LONG AND 2.2 KILOWATT SPINDLE DOES NOT FIT. SEEMS LEAD SCREW YOU SENT WITH KIT IS SHORT 42" LOOKS LIKE IT NEEDS TO BE 5 OR 6 INCH LONGER. THIS CORRECT? WHAT THE NEEDED LENGTH FOR UNIT?
  • WHAT THE RECOMMENDED INTERVAL FOR RECEIVING INFLUENZA VACCINE AFTER AN ALLERGY INJECTION?

    Vaccines can be administered at any time before or after administration of an "allergy injection."

    Click the link to respond:
    WHAT THE RECOMMENDED INTERVAL FOR RECEIVING INFLUENZA VACCINE AFTER AN ALLERGY INJECTION?

  • Motor tuning. While motor tuning what are the recommended steps per inch, velocity, and acceleration for the BlackFoot CNC?

    These are the recommend values(default) for our blackFoot CNC machine, the acceleration and velocity can be adjusted as high as the motor can rotate without stalling! Suggested increment's will be by 10's.

    blackFoot:
    X-axis
    “CW8060 (6.0A) Driver”
    Set to 1/16 Microstep, 5.43A
    Dipswitches: 01100110 (“0”=down, “1”=up)
    Mach3 Motor Tuning: 914.29 steps/in, Velocity 400.02, Acceleration 4
    Y-axis
    “CW230 (3.0A) Driver”
    Set to 1/16 Microstep, 2.7A
    Dipswitches: 11001100
    Mach3 Motor Tuning: 1422.22 steps/in, Velocity 400.02, Acceleration 4
    Z-axis
    “CW230 (3.0A) Driver”
    Set to 1/4 Microstep, 2.7A
    Dipswitches: 10101100
    Mach3 Motor Tuning: 1600 steps/in, Velocity 79.98, Acceleration 5

    Additional Information:
    how can we tuning the CNC motor

    Click the link to respond:
    Motor tuning. While motor tuning what are the recommended steps per inch, velocity, and acceleration for the BlackFoot CNC?