We offer a laser/spindle Z-axis attachment for our 4x8 greenBull CNC. The blackFoot 4x8 does not have a large enough gantry to accommodate the 40W laser tube.

Additional Information:


Additional Information:
We do sell the parts to convert your CNC milling machine to a laser, but you will need to develop the mounts that will hold all of the laser parts to the machine, if the machine was design and built by you.

We can offer guidance for this conversion.

The laser parts can be found here:
https://www.buildyourcnc.com/LaserComponents.aspx

Click the link to add information to this solution:
I already built a 4 x 8ft carving machine, I would like to modify for laser cutting wood. Do you sell a conversion kit? I use Mach3 software and steppers. Thanks Ray

All of our CNC machines can carve at that depth without a problem and do 3d carving. Our typical application is cutting sheet materials, but a good percentage of our customers cut 3D bas reliefs or even more complex 3D objects using reference points and jigs.

Most of our CNC machines have a Z travel of at least 6 inches for the smaller machines and 7 to 10 inches for our larger machines. The Fabricator Pro has a Z travel of 10 inches.

Depending on your application, you will need to consider the length of the end mill (more than the deepest depth of the 3D carving) and the stock that you will be using. If the stock plus the length of the end mill exceed the clearance with the Z axis raised to the top extent, then you will need to consider the way the table/bed of the machine is formed (maybe with a depression to take advantage of the greater need for clearance).

The greenBull has the capability of Z axis travel of up to 36 inches, but I would recommend, if milling wood, that the Z-axis not extend more than 12 inches to reduce deflection.

Additional Information:
Most of the CAM software on the market will have 3D profile machining operation capabilities. CAMBAM has a very nice 3D prpfiling feature. The Vectric line of software can definitely handle this as well.

Click the link to add information to this solution:
All of the pics and videos show your cncs cutting sheet materials, I'm interested in carving 3d images in plastic and hardwood slabs up to 2" thick. What machine and software would you recommend?

There are several endmills that would work for that application. Here's the one we use in our own shop: https://buildyourcnc.com/Item/endmill-singleflute-upcut-Onsrud-1-flute-plastic-wood-aluminum for cutting .75 inch MDO.

Click the link to add information to this solution:
Which end mill would you advise to buy for cutting in full depth MDF and plywood of up to 20mm thickness? I am about to install a 2.2k spindel on my cnc.

Dealing with our inverters, they are built with a bit of margin on the input power. For our 220V VFD the margin is from 170-250V 50/60Hz, so running our VFD in your location will not be an issue! Our electronics will not have a issue running at 230V as well.

Click the link to add information to this solution:
Hello. I am interested in the green bull 6X long z CNC machine with electronics. I live in NZ, where the voltage is 230 V and 50 Hz. is it going to be possible to get the inverter to run here? Thanks!

The 5x10 greenBull base kit comes with the structure, hardware, and electronics for motion control. In order to have a fully functional CNC you will need a table base for your machine, a spindle or router to handle your cutting applications, end mills (bits) for cutting, CAD, CAM and CNC software, and a computer. There are also accessories you can add such as limit switches, emergency stops, and cable carrier for cable management. If you are looking for more information or a formal quote please contact sales@buildyoucnc.com

Click the link to add information to this solution:
I'm not sure of ALL the things I will need to do some of my ideas for the cnc machine. I'll mostly be cutting out 3/4" plywood projects. How much minimum for a 5' by 10' system? I need the hardware and software to get the job done. I saw the price for your basic unit 3-4 grand but don't know what all I NEED to start work.

To home the z-axis using a plate:
- Connect the end mill using a large clamping device like an alligator clip with a wire connected to GND.

- Connect the plate (solder a wire to the plate) to one of the input pins.

- You can use the autoset to setup that pin in Mach3 simply by touching the two together once connected to the pin and GND.

Alternatively, the end mill can be connected to the pin and the plate connected to GND as long as there becomes a complete circuit when the end mill touches the plate.

To setup homing for the Planet-CNC homing and limits, go to the Planet-CNC Machine setup page which explains the process step by step: http://www.planet-cnc.com/faq/machine_setup/

Customer Response:
How do I get homing on z to work with planet cnc software using build your own usb board. I have gone to planet website and followed the instructions provided but my software will not allow entries in the required fields they are grayed out is it because I am not using planet-cnc's board, I have used this method for years with Mach3 and would like to use it with the usb board and software.

Answer:
Just received information from the developer. The instructions on how to use a plate for z-axis homing (moveable sensor) can be found here:

http://www.planet-cnc.com/faq/moveable_sensor/

Click the link to add information to this solution:
How do I get Homing on Z to work with Plate and Ground using Buildyourcnc usb board all the entries for the sensor in planet-cnc are grayed out. I am using input z- and I purchased the software

If you were logged in when you made the purchase, you can click the "My Account" link at the top of any page on this website and see all of your orders, order line items (with direct links to these items), and shipment information.

Here is a link to the "My Account" page for your convenience:
https://www.buildyourcnc.com/CustomerInfo.aspx

I did not see your username on your internal customer record, so I added this username and you should be able to see the information in the "My Account" page.

Additional Information:
I just tested your accounts page and the cable carrier links are in there. Thanks and please let me know if you need further assistance.

Click the link to add information to this solution:
I have purchased cable carrier chain and would like to know if you could send me a copy of that order as I need to purchase extra lengths of the links I bought. Thanks

The limitation of our machines lies with the width of our gantry, so extending the blackToe to 2' x 6' will not be a problem. Adding the required aluminum rails and chain is the essentials that we sell on our website(http://www.buildyourcnc.com/CNCMachineMechanicalParts.aspx). The table extension is something we do not offer. Please contact (customerservice@buildyourcnc.com) for custom requests.

Click the link to add information to this solution:
I have a Black Toe CNC with your optional table, and wish to extend the x-axis to 6' of cutting length. Is is as easy as ordering another section of table, longer x-axis chain, and longer x-axis rails? If so, would you sell these items?

This would totally work for that application. This cable carrier is used for any object that needs to move and carries some electrical or tubing within it. This cable carrier is great for cable management where you want to make sure the wires and tubes are in a position that you set, not where the wires and tubing want to go.

Click the link to add information to this solution:
[311] I am looking to use this type of thing with a pipe for theater. Where the pipe can be lowered and it would have electrical and signal cable inside. Is this good for that or should I look at something else?

If you are located near Houston, Texas area you can stop by our shop. If you are not near us, you can check in our forums, and see if you can find someone in your area that has one of our machines, and would be willing to let you come see it in action.

Click the link to add information to this solution:
I WOULD LIKE TO KNOW IF THERE IS A STORE OR SHOP WHERE CAN SEE THE PRODUCT AND BUY IT?

If you would like to come to the office, please call the office at 281-815-7701 to request a visit at your specified time within our business hours so we can make sure that the right person will be there to assist you.

Click the link to add information to this solution:
I am considering the purchase of a Black foot or Green Bull CNC router and would like to come and visit your facility to see them in person and to discuss my requirements. Please can you tell me your address. I am based in NW Houston. Many thanks.

If you purchased the ArtCAM from us, please send an email to us at customerservice@buildyourcnc.com with the name used with making the order and we will contact the developer to send you the license.

Click the link to add information to this solution:
i have Artcam 2013 for an General Inc. Icarver 40913. My computer crash with the Licenses from Delcam i would like to know how to get the licenses.

It's generally acceptable to use one pin for all of your limit switches wired Normally Closed (NC), and another separate pin for a Z probe that is Normally Open (NO). LinuxCNC is quite flexible and allows for mixed configurations of NC and NO switches.

Just ensure you configure LinuxCNC correctly to recognize each pin's logic (Active low or active high). And perhaps run a few tests before running the machine.

Additional Information:
It's generally acceptable to use one pin for all of your limit switches wired Normally Closed (NC), and another separate pin for a Z probe that is Normally Open (NO). LinuxCNC is quite flexible and allows for mixed configurations of NC and NO switches.

Just ensure you configure LinuxCNC correctly to recognize each pin's logic (Active low or active high). And perhaps run a few tests before running the machine.

Click the link to add information to this solution:
[59] is it ok to use one pin for all of the limit switches wired NC and another pin for a z probe that is NO, or do all input pins need to be the same (NC or NO)? I would like to use LinuxCNC but will use Mach3 if necessary. a thanks!

Has the tube functioned properly prior to this issue?

Click the link to add information to this solution:
I am having issues with the laser firing. Seems like there is an arc in the end of the tube where the elctrode is but i am not sure if i am doing something wrong.

Here is how to connect your router to the parallel breakout board through the on-board relay. You will need a spare extension cord. You will need to remove a portion of the outer jacket of the extension cord to expose the white, black and green wires (white = neutral, black = live and green = ground), understanding that the neutral and live create the completed circuit.

See this image of a similar connection. The terminal has the same connections.
https://www.buildyourcnc.com/images/vacuum-pressure-controller-relay-terminals-700.JPG

Image of the relay terminal:
https://www.buildyourcnc.com/images/breakoutboardrelayNONC.PNG

The live/black wire would be cut and one end of the cut would be secured into the P terminal and the other cut end would be secured into the S terminal. The live and ground wire would be uncut and travel from the plug to the router.


Additional Information:
You can also connect other high powered devices to the breakout board using any of the output terminals. You will need to supply extra relays like the one shown here:
https://www.buildyourcnc.com/item/electronicsAndMotors-breakout-Relays-relay-board-250V-12A-5V

Or you can find SSRs (Solid State Relays) that will accept 5v to drive the relay coil. Make sure the SSR will protect the 5V line from Back EMF as there is a coil in the relay. The one we sell contains a fly-back diode to protect the 5v terminal.

Click the link to add information to this solution:
I have your breakout board with relay parallel port , I have a vacuum, light on router and air pump I want to also hook up to board, can I hook those up to board and also could I had reylays to each one, what is the best way to figure this out any information would be great. Thanks

Currently our only location is in Katy, Texas at this current time, we can help you assemble the machine and if any issues occur we can always help you with the problems, but will have to be managed through email or phone (which ever is your preference).

Click the link to add information to this solution:
I live in China and my company would like to buy the 40w laser cutting machine. I am wondering if you can help us assemble and maintain the machine in China? Do you have any service point here? Thank you

You can control our 40W laser power supply (which controls the laser tube) with an Arduino, if that is your intention. The trigger for turning the laser on and off uses a 5V level. To control intensity, you can use the Arduino PWM output. If you want the Arduino to move the machine as well (providing pulse trains to each of the stepper motor drivers) then you will need to make sure you consider the processing speed of the Arduino so you will be able to run the stepper motors at the speed you need for the laser engraving/cutting.

Our laser controller do all of these functions. Here is a link to our laser control system:
https://www.buildyourcnc.com/item/Laser-Component-Laser-Control-System



Additional Information:
Thank you! I am building a 3 axis cnc/ engraver and I think this would be a good option as well as the router head and the 3d printing head. How heavy is the tube? I may mount it directly onto one of the axis of the machine to eliminate the need to line up all three axis, similar to what you have with your xl engraver.

Additional Information:
The tube isn't that heavy, but when filled with water, it can get up to a few pounds. The key is to use the axis moving the nozzle for engraving as this requires fast back and forth motion. The cutting is generally dependent on the axes moving from vector to vector at a relatively slow motion, so this is not a problem.

Click the link to add information to this solution:
I would like to build a low cost laser engraver/ cutter, can your 40w laser power supply be controlled with an arduino or is it only controlled by the controller sold here?

Our electronics contains a switchable power supply that allows you to switch the input mains voltage between 115 volts (110/120) and 230 volts (220/240). the hertx range is not specified, but there are capacitors to smooth out standard frequencies to enable DC output.

Click the link to add information to this solution:
hi, what about, if I buy from you some elecronic parts like (3 Axis Electronics Combo) and I use them here in france , where the electric voltage is 220V 50Hertz ? thats gonna works? thanks

Dealing with our USB BoB, the potentiometer that will be used in the key jog, is a 5V, 5k - 10k Ohm potentiometer.

Click the link to add information to this solution:
I am building a cnc mill using your USB controller and i would like to know what is the specification of potentiometer used for adjusting manual axis jog speed