We carry several sizes of lead screw and stepper motors on our website, for example here https://buildyourcnc.com/Item/mechanical-leadscrews-lead-screw-!5-5-starts-10-tpi and here https://buildyourcnc.com/ProductSearchResults.aspx. Please call us at 281-815-7701 to discuss the particular lengths you would need and shipping options.

Additional Information:
https://buildyourcnc.com/ProductSearchResults.aspx is not working

Additional Information:



Additional Information:

Click the link to add information to this solution:
I have a project very similar to cnc machine. I need 3 lead screws of 1.8 m with all set (supports, bearings...etc). and 3 NEMA 42 motors that I can connect with. if those are available, I need the information about shipping to Oman or UAE.

The files and hardware option for our machines has been removed from the site due to the following reasons:
Difficulty for the end use of the files and the challenges (and time/money) on our side to assist in using these files.
The abuse of these files over the internet.
Ultimately may reduce the sales of machines keeping us in business.
Sadly, this is what has come out of our company attempting to be open; however, the machines sold on this site is still far lower in price than the competition for the quality that we provide as we have a great desire to engender the cottage industry to fulfill their need for low end manufacturing. My sincere apologies if this causes any inconvenience.

Additional Information:
NO, is not possible, I can help with the shipping cost

Additional Information:

Click the link to add information to this solution:
IT POSSIBLE TO BUY THE CAD FILES FOR BLACK FOOT MACHINE, MECHANICAL PARTS AND ELECTRONICS BUT NOT WOODEN PARTS, SAVE SHIPPING COSTS? IN THAT CASE I WOULD INSTRUCT SOMEONE MILL ME.

The 5x10 greenBull base kit comes with the structure, hardware, and electronics for motion control. In order to have a fully functional CNC you will need a table base for your machine, a spindle or router to handle your cutting applications, end mills (bits) for cutting, CAD, CAM and CNC software, and a computer. There are also accessories you can add such as limit switches, emergency stops, and cable carrier for cable management. If you are looking for more information or a formal quote please contact sales@buildyoucnc.com

Click the link to add information to this solution:
I'm not sure of ALL the things I will need to do some of my ideas for the cnc machine. I'll mostly be cutting out 3/4" plywood projects. How much minimum for a 5' by 10' system? I need the hardware and software to get the job done. I saw the price for your basic unit 3-4 grand but don't know what all I NEED to start work.

The drivers have quite a bit of protection, so you probably won't ruin anything. You motors are jumping and that is just the motors engaging from getting power from the power supply.

There could be many reasons your motors don't turn. Consider these troubleshooting tips:

- If you are using our parallel breakout board, make sure that the step pins are set for active low (config -> Ports and Pins -> Motor Outputs -> the steps pins should be enabled and set active low)

- The parallel breakout board is powered (connect the USB to the computer using a USB cable)

- In Mach3, make sure you have jog enabled (a little green button at thelower middle of the page in the program run screen).

Additional Information:


Additional Information:
DS26

Click the link to add information to this solution:
If I wired my stepper motors incorrectly what parts of the electronics will be ruined? When I turn on the power, my motors jump like they are supposed to but for some reason, the G-code doesn't seem to be moving from Mach 3 to the motors. Any help would be appreciated. Do I need to order new electronics or just part of the system? Thanks

That will depend on the controller that was installed in the redFly. If the controller is a pokeys57CNC controller, you can use Mach 4 with that system.

You can add a 4th axis and an ATC (Automatic Tool Changer) with the redFly system.

Click the link to add information to this solution:
Does the Redfly that I bought with the GreenBull in 2016 work with Mach4? Also I want to add a 4th axis and a spindle with automatic tool changer. Will this work too or do I need a new control board? I bought my CNC with a longer Z travel, so I have plenty of room for these. Thanks!

Prices on amazon are fixed costs for shipping. The website generally reports high costs for international shipments but we can give you a better quote if you care to email sales@buildyourcnc.com

Click the link to add information to this solution:
I want to order 8 HIWIN Linear Guide Blocks. Is there a cheaper shipping option? $70 is too much for something that weighs less than 5 lbs. I live in the continental US

All of our CNC machines can carve at that depth without a problem and do 3d carving. Our typical application is cutting sheet materials, but a good percentage of our customers cut 3D bas reliefs or even more complex 3D objects using reference points and jigs.

Most of our CNC machines have a Z travel of at least 6 inches for the smaller machines and 7 to 10 inches for our larger machines. The Fabricator Pro has a Z travel of 10 inches.

Depending on your application, you will need to consider the length of the end mill (more than the deepest depth of the 3D carving) and the stock that you will be using. If the stock plus the length of the end mill exceed the clearance with the Z axis raised to the top extent, then you will need to consider the way the table/bed of the machine is formed (maybe with a depression to take advantage of the greater need for clearance).

The greenBull has the capability of Z axis travel of up to 36 inches, but I would recommend, if milling wood, that the Z-axis not extend more than 12 inches to reduce deflection.

Additional Information:
Most of the CAM software on the market will have 3D profile machining operation capabilities. CAMBAM has a very nice 3D prpfiling feature. The Vectric line of software can definitely handle this as well.

Click the link to add information to this solution:
All of the pics and videos show your cncs cutting sheet materials, I'm interested in carving 3d images in plastic and hardwood slabs up to 2" thick. What machine and software would you recommend?

You can purchase the entire length and select local pickup. Then you can email us the cut lengths for the order and let us know that you need to be invoiced for shipping. We will provide shipping estimates according to the real lengths and dimensions of the package. You can select the estimate that meets your shipping budget and we will invoice you the shipping amount and send the order.

Click the link to add information to this solution:
Hi I built a 2x4 cnc machine in 2013 using you Hardware kit and plans. I want to speed up my cnc machine by purchasing your acme leadscrew 1/2"-10 5 starts. I have an X axis at 52", a Y axis at 32" and a Z axis at 14". How do I order all 3 length pre cut to size on your website? Also can you give me a rough estimate on the shipping to Ottawa, Ontario Canada please.

We don't hold those boards in-house anymore. You can use the schematic to form your own boards if you wish.

Additional Information:
Thanks for the reply. Has this proven to be a good design?

Additional Information:

Click the link to add information to this solution:
Regarding L6203/L297 Stepper Board Driver, would you be willing to sell two unpopulated boards? A friend and I are each building a low cost CNC and I already have most of the components. Thanks.

All the options for and variations of our blackTooth laser cutter/engraver are available on our website here https://buildyourcnc.com/blackToothLaserCutterAndEngraver.aspx#prettyPhoto. The wiring diagram is available here: https://buildyourcnc.com/blackToothLaserCutterAndEngraver.aspx#prettyPhoto/0/
We do not offer plans or a bill of materials for our machines at this time, but if you are interested in doing your own from scratch you can learn a lot about the design and build process from our tutorials. We wish you success in your endeavors.

Click the link to add information to this solution:
How can i get a complete list of all the components (electronics) I need for a CNC laser cutter with the laser controller? A wiring Diagram would probably be very helpful.

If your motors are hot to the touch, this is normal. Current is being drawn by the motor coils as the motor moves and as the motor stays at a position. If the motor is not using the current in the coils to move (holding it's position), the energy will be translated as heat (rather than motion, sound or light). Even while moving, some of the energy will be lost as heat. Remember that energy cannot be created nor destroyed.

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
I HAVE FOLLOWED ALL THE "CNC ELECTRONICS 1 - 9" VIDEOS AND I'M USING ALMOST EXACT SAME COMPONENTS (MOTORS RUN SOUND GOOD) BUT MOTORS ARE RUNING VERY HOT IN JUST 15MIN WITH NO LOAD DONE SOMETHING WRONG OR DO STEPPERS HOT?

Your question caused me to make a quick video to understand how the pokeys57CNC controller works with a THC.

Click the link to add information to this solution:
[596] Would you help with the Hook up and the Configuration and whether it is in the Plugin or mach 4 control configuration that needs to be set. I decided to use the ultra fast encoders connector pin #8, 12 and 13 for Arc ok, UP and Down. Please advise what setting to set to make it all work. Thank you very much for your help!

The files and hardware option for our machines has been removed from the site due to the following reasons:
Difficulty for the end use of the files and the challenges (and time/money) on our side to assist in using these files.
The abuse of these files over the internet.
Ultimately may reduce the sales of machines keeping us in business.
Sadly, this is what has come out of our company attempting to be open; however, the machines sold on this site is still far lower in price than the competition for the quality that we provide as we have a great desire to engender the cottage industry to fulfill their need for low end manufacturing. My sincere apologies if this causes any inconvenience.

Additional Information:
NO, is not possible, I can help with the shipping cost

Additional Information:

Click the link to add information to this solution:
Will it be possible to only buy the CNC plans, I live in South Africa and shipping is very expensive...

With our current models, that is a no. However our machines have the ability to be expanded length wise to the customer's choice. So you can design a share table if you add the required length of chain and rails and design the table accordingly to your specifications.

Click the link to add information to this solution:
The blackFoot 4'x8' CNC machine. Can Gantry be removed for festool track saw operation? A shared table situation. I am thinking that would be a no answer. But maybe a future design feature as run the gantry to far end and add a short opposite end section to allow a shared table set up.

Sure, let me check.

Additional Information:
Your order was shipped out on Tuesday (10/20/2020). I noticed that your email was not stored in the customer record when the order was made. I will send you the tracking number via email now.

Click the link to add information to this solution:
Placed an order for the cable set for the Pokeys57cnc interface on 10/20 but it is not showing up in My Account as being ordered. It was charged to my credit card and I have not had any info that it was received by you.

Absolutely! You can have almost unlimited limit switches and home switches on this controller. It all comes down to the wiring scheme used. I recommend the home switches be on separate input terminals. For example, IN1 would have the X home switch, IN2 would have the Y home switch and, IN3 would have the Z home switch if you plan on using home switches for the Z axis.

Adding the limit switches, these can be located on any input you want, even on the IN1, 2 or 3. The wiring scheme I like to use is as follows:
- IN1 has the X home, X limit ++, and X Limit --
- IN1 has the Y home, Y limit ++, and Y Limit --
- IN1 has the Z home, Z limit ++, and Z Limit --

In most cases, the Limit -- is the same switch as the Home switch.

These can be wired as NC (Normally closed) as a serial scheme, or as NO (Normally open) as a parallel scheme.

To understand the limits and wiring schemes, check out this video:

Click the link to add information to this solution:
[575] Hi, for the manage the limit switches, is it possible to have, for example, the same limit switch for X-- and X homing? And what is the configuration in mach3? In my CNC machine they are in the same position. Thank you

If you already have a Mach3 license, you don't need to purchase another one. The license is connected to you rather than the computer. Mach4 is licensed to the computer, but you are able to have multiple computers for each license, and can be switched from one computer to another.

If you purchased the license from me, you can call (make sure to leave a voicemail), or email to get a re-issued license.

Click the link to add information to this solution:
[575] I have an older CNC (2018) which has been working fine. The Windows 7 PC crashed and I am trying to get operational again using a windows 10 machine. I will have to buy a new license for the Mach 3 so will need to get the interface board I have to talk to MAch 3. Can I get just the disc or is there a place I can download what I need?

I believe the country of Puerto Rico may need to be US instead. I will change the cart's country field tonight so that it reflects the correct value.

Additional Information:
I see that you used US and may have worked for the US postal department but I also noticed there is an exception for UPS. I will do further research and fix this issue for PR customers! Many thanks for your patience and persistence.

Additional Information:
I just completed some fixes to the cart that corrects the Puerto Rico address for USP and USPS. It appears that USPS and USP require differences in the way the country is designated.

Thank you for bringing this to our attention and please let us know if you are experiencing any further issues.

Click the link to add information to this solution:
I need to buy a bottle laser 80w but the page does not i calculates the delivery to San Juan PR via UPS. I need to know immediately in order to be able to make the purchase immediately.

Yes, you can purchase the blackToe 2'x4' CNC machine kit without the optional table.
https://buildyourcnc.com/Item/cnc-machine-blacktoe-v4-2x4

The 4th axis product can be found here:
https://buildyourcnc.com/item/axes-4th

We recommend Mach3 or LinuxCNC to control the machine:
https://buildyourcnc.com/item/control-SOFTWARE-mach3
https://buildyourcnc.com/item/control-SOFTWARE-linuxcnc

When you go to the cart to check out, the shipping prices will be displayed when you click on the calculate shipping button.

The instructions to assemble the machine is on the product pages of the machine and parts you purchase. See above links.

Click the link to add information to this solution:
hello, is it possible to send all components of a 4Axis CNC in size of ( about 2' x 5' ) to Iran country without table and all required manuals and measurements to create and assemble cnc machine and table plus required software? i need total price for this request if it's possible for transfer.