What 3d printer do you have?

Additional Information:
whiteant

Click the link to add information to this solution:
HAVE 3D PRINTER THAT WANT TO MAKE CNC ROUTER ,IS THERE ANY GUIDES SHOW ME THE WAY

The CNC group is a splinter group of the Woodworker's Club of Houston" and can be found at this website: http://wwch.org

You can contact them via their contact us page here: http://wwch.org/ClubBus/ContactUs.htm

They have regular meetings at the location specified on their homepage. You can also go there and talk to some of the CNC group's members.

Click the link to add information to this solution:
Hi Patrick What is the name of that organization for CNC enthusiast in Houston and Katy TX and phone number please. Thanks

For complicated requests, please refer to our (customerservice@buildyourcnc.com) email. For further help, now this apply's to a custom machine, I would request a post in our R&D section.

Click the link to add information to this solution:
I need the blackfoot gantry, the red frog router mount, redfrog plug and play with the vacuum pump and pipes connected. Please give me a quote.

You can see the component list on the hardware and plans machine (scratch build machine) since it is the same machine in the book:

https://www.buildyourcnc.com/Item/cnc-machine-scratchbuild

Additional Information:

Click the link to add information to this solution:
I have just brought your build your own cnc machine book and it talks about PDF downloads. Where do I find them please ?

Yes, the blueChick kits are available. You can get the shipping rates automatically in the shopping cart. There will be a calculate shipping button on the enter shipping information section of the shopping cart.

Click the link to add information to this solution:
CAN YOU PLEASE TELL ME THE AVAILABILITY OF 12X36 BLUE CHICK 4.2, AND COST FOR SHIPPING TO ZIP 72802 IN RUSSELLVILLE, ARKANSAS?

Depending on the specific software you have bought, it might require you to download the main software via their main website. While we will send you the license via email, to unlock the complete software capabilities.

Click the link to add information to this solution:
I ordered software for download and it hasn't arrived. It has been several hours. Please advise on the status.

Mounting the extruder to the whiteAnt can be done a couple of ways. One is to take the 4 mounting holes located at the lower portion of the z-axis rail support and use long screws protruding out. Take a thinner material and drill the four holes matching the locations of the 4 screws and screw on nuts to hold it in place. The other option would be to use the metal bracket and fasten to the edge of the rail support.

Click the link to add information to this solution:
CAN YOU GIVE ME SOME HELP OR POINT IN THE RIGHT DIRECTION TO INCORPORATE MK 7 EXTRUDER WITH BOOK PLANS FOR 3D PRINTER?

We offer as much information as possible about the design and building of CNC machines through this website and the forums at buildyourtools.com. We also still offer our "scratch build" plans at https://buildyourcnc.com/item/cnc-machine-scratchbuild, where you can order the plans and DVD to build your own machine with or without the necessary hardware components.

Our technical support staff are occupied full time assisting customers who have bought complete kits or assembled machines, and unfortunately do not have the resources to provide one-on-one advice to individuals.

Click the link to add information to this solution:
I Want to design and build my own CNC wood working machine. Do you give advice and help advice to do this?

That is a good question. We have not tried to weld thermoplastics using our CO2 Lasers. It is possible since the laser outputs a heat source and at the right intensity and speed, the thermoplastic can be heated and melted rather than instantaneously vaporized and off gassed. I have done research to see if CO2 laser can weld thermoplastics with positive results.

Our CO2 lasers are typical of other laser cutters on the market, so if their literature, or examples you have found, successfully weld thermoplastics, then ours will probably be able to as well.

In some cutting test with different speeds and intensities, the kerf has welded back together; however, this was caused by an unintentional process rather than an intentional one.

Click the link to add information to this solution:
Would any of your CNC laser machines be appropriate for welding of thermoplastic materials?

That is a good question. We have not tried to weld thermoplastics using our CO2 Lasers. It is possible since the laser outputs a heat source and at the right intensity and speed, the thermoplastic can be heated and melted rather than instantaneously vaporized and off gassed. I have done research to see if CO2 laser can weld thermoplastics with positive results.

Our CO2 lasers are typical of other laser cutters on the market, so if their literature, or examples you have found, successfully weld thermoplastics, then ours will probably be able to as well.

In some cutting test with different speeds and intensities, the kerf has welded back together; however, this was caused by an unintentional process rather than an intentional one.

Click the link to add information to this solution:
Would any of your CNC laser machines be appropriate for welding of thermoplastic materials?

Yes, You can order, only you need supply the information of the machine.

Click the link to add information to this solution:
Is it possible to order just the gantry assembly for the black toe machine?

These files are no longer available. We suggest purchasing a kit, like the blackToe, or blackFoot as these kits are far more rigid and perform much better.

https://www.buildyourcnc.com/blackToe2x4v40.aspx

https://www.buildyourcnc.com/Item/cnc-machine-blackFoot-v4

Additional Information:
20

Additional Information:

Click the link to add information to this solution:
Would you be able to provide .DWG/.DXF files instead of .NC files for the CNC Routing Machine Kit Version 1.3 please?

At this time, we don't offer drawings or digital files for the redLeaf or redSprout CNC computer system.

Click the link to add information to this solution:
Can I please buy a vectored drawing of the redleaf control box to cut out on my cnc?

The electronics (stepper motors, drivers, power supply and interface board) can be found here:
https://www.buildyourcnc.com/item/electronicsAndMotors-3axis-425-elcombo

If your computer cannot connect to the parallel breakout board (the interface card), just make sure to inform us that you need the USB alternative.

Click the link to add information to this solution:
Just purchased the book "Build Your Own CNC Machine". Can I get hardware and electronics kits and how?

You may have called outside of our business hours. Give this "Customer Service Live" mechanism a try and ask away. If you would still rather call us, please call between 9:00am and 5:00 pm Central Time.

Click the link to add information to this solution:
I need technical support for your Bluechick CNC and I can't get a reponse on the phone.

The book design uses all NEMA 23/24 motors which can be found here:
https://buildyourcnc.com/item/electronicsAndMotors-3axis-425-elcombo

I recommend the Mach3 USB option as you will be able to use the USB connection for control.

If you are planning to build from the plans developed by the folks over at Woodsmith Magazine which is loosely based on the book design, use this electronics package:
https://buildyourcnc.com/item/electronicsAndMotors-3axis-heavy-gantry-elcombo

Click the link to add information to this solution:
Which electronics package is required for the CNC machine from the book designs?

For purchasing on our website, our account log in is a safe way to keep your personal data at hand for future orders. However we do not keep any bank information in our systems, it is a single use system.

Now dealing with the cnc book, you can view our web version of the book with a list of materials and hardware that will be needed here (https://www.buildyourcnc.com/cnckitintro.aspx).

Adding the items to your cart in the quantity's needed, now for certain items for example, or ACME screws, and aluminum angles will require a total length needed, but the specific lengths required will have to be email here (customerservice@buildyourcnc.com) or called here (281-815-7701) with the completion of your order.

Click the link to add information to this solution:
I want to purchase some items from your co. How do i go about it. I already have the buildyourcnc book and wand to begin.

We are able to work with many different options to provide solutions for our customers. Please send an email to customerservice@buildyourcnc.com for further assistance with this matter.

Click the link to add information to this solution:
Is it possible to integrate the shipping costs of 2 CNC machines paid separately, but same shipping address?

You can see the component list on the hardware and plans machine (scratch build machine) since it is the same machine in the book:

https://www.buildyourcnc.com/Item/cnc-machine-scratchbuild

Additional Information:

Click the link to add information to this solution:
Sorry but did not get copy of address for downloading MDF Plans and Cut List PDF fileHow do I download the MDF Plans and cut List PDF file please