I can provide a drawing for that part or I can sell you the part of the machine that you need. Just email me at customerservice@buildyourcnc.com with a description of the part you need.

Click the link to add information to this solution:
How can I get a replacement part for my Green Lean machine that i cant order from the Stuff For Sale page? I need the bearing truck plate for the Constant Force Spring. Or is there someplace I can get a drawing of the part so that I can make one?

If you're talking about the anti-backlash nut, ou can find replacements on our website here: https://buildyourcnc.com/CNCMachineMechanicalParts.aspx and here: https://buildyourcnc.com/CNCMachineMechanicalParts.aspx. If you have something else in mind, please contact us to further describe the part you need.

Click the link to add information to this solution:
I own a BlackToe cnc machine. The plastic threads with the spring over them broke. Where can i purchase a replacement part?

Yes, we will provide one on the website (4/10/2014).

Click the link to add information to this solution:
The blue insert on my laser cutter nozzle broke during install. Is there anywhere I can find a replacement.

To assemble the blueChick v4.2, you will need two sets of instructions, the assembly instructions for the main body and mechanicals of the CNC machine, and the instructions to connect and test all of the electronics.

The assembly instructions are located at this URL towards the bottom of the page (click on each picture to get a larger view):

https://www.buildyourcnc.com/blueChickVersion42CNCMachineKit.aspx

The instructions to connect and test the electronics can be found at this URL:

https://www.buildyourcnc.com/CNCElectronicsandWiring.aspx

Click the link to add information to this solution:
I have a blueChick version 4.2 CNC Machine with no schematics for it is there anyway possibly i can get them so i can finish putting my cnc together

(These steps are to be taken with precaution, due to the fact that we do not know the model or manufacturers specifications for your BoB)

Here is a link to our CNC electronic videos(

Click the link to add information to this solution:
I have a CNC Machine from China, and the Breakout Board is not Labeled. Is there any way to test the board using Mach3 to find out the pin designations? db25 bob

Yes, the customer will need to sign our NDA (Non Disclosure Agreement) form and send it back to us. We will then send the dxf of the specific updated part of the machine.

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
UoZD5KPp

Additional Information:
-1 OR 2+416-416-1=0+0+0+1 --

Additional Information:
-1 OR 2+291-291-1=0+0+0+1

Additional Information:
-1' OR 2+657-657-1=0+0+0+1 --

Additional Information:
-1' OR 2+849-849-1=0+0+0+1 or 'WBwHf8k5'='

Additional Information:
-1" OR 2+276-276-1=0+0+0+1 --

Additional Information:
1'"

Additional Information:
1����%2527%2522

Additional Information:
@@z69Jq

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
CAN I GET DXF FILES FOR THE UPDATED PARTS OF MY MACHINE?

No, we have gotten away from the planet-cnc boards as they have decided to not support our board with their software. You can use the Mach3 USB board as an alternative. You will be better off with Mach3 as a control software as this is widely used and supported.

Mach3 USB board:
https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach3-USB-Board

Click the link to add information to this solution:
I have the older discontinued USB breakout board. The y-axis no longer works and have traced it to the breakout board. Is there a replacement board that can use the same Planet CNC software running on Windows 10?

Yes, You can order, only you need supply the information of the machine.

Click the link to add information to this solution:
Is it possible to order just the gantry assembly for the black toe machine?

That is a good question. We have not tried to weld thermoplastics using our CO2 Lasers. It is possible since the laser outputs a heat source and at the right intensity and speed, the thermoplastic can be heated and melted rather than instantaneously vaporized and off gassed. I have done research to see if CO2 laser can weld thermoplastics with positive results.

Our CO2 lasers are typical of other laser cutters on the market, so if their literature, or examples you have found, successfully weld thermoplastics, then ours will probably be able to as well.

In some cutting test with different speeds and intensities, the kerf has welded back together; however, this was caused by an unintentional process rather than an intentional one.

Click the link to add information to this solution:
Can a CO2 CNC laser machine be used for welding of thermoplastic materials?

Yes, we have a 4 axis combo kit available under Motion Electronics.

Click the link to add information to this solution:
Can you supply an electronics package for a dual x-axis CNC machine (X, Y, Z)

Yes, you can contact me at customerservice@buildyourcnc.com to get the full BOM for that machine.

Click the link to add information to this solution:
I have a green lean machine that I acquired from a friend that had to move cross country and could not take the machine with him. It was partially disassembled and stored in his garage. Unfortunately, he lost a couple of parts I cannot easily replicate. Is there a parts list anywhere for this machine so that I can order replacements?

Yes, I will need to know more specifics of the machine so I can recommend the correct electronics.

Click the link to add information to this solution:
ok I Build my CNC machine table and now need a complete set for motor and software how you can help me

If you purchased a machine that was used and you don't know which mode it is, you can browse our models here:
https://www.buildyourcnc.com/Item/milling

Click the link to add information to this solution:
I bought an used machine that need work how can I find the model. The owner said, he used this site for parts and manual.

No, at this time, we do not offer any .dxf or any other type of file to cut the pieces for the DIY Combo #1. Just the directions that you are already able to access with the dimensions in them.

Additional Information:

Click the link to add information to this solution:
Are there .dxf files or other files for the MDF parts in Combo #1 so that they may be cut using a CNC?

Yes, the 5 axis breakout board is a very suitable replacement and also contains a relay for spindle/router control which is not on the C10 board.

Click the link to add information to this solution:
I have propably blown my C10 breakout board. This is no longer available in your parts list. Is the 5 Axis Breakout Board with Relay a suitable replacement?

We have sent machines everywhere across the globe and we can work with freight companies to get you a good rate on a shipment. Please email sales@buildyourcnc.com to request a quote.

Click the link to add information to this solution:
Im from chile have you ever send any machine to south america? can i buy only the mechanic and electronic things ( wood parts are much weight)

Using Anti-Freeze in the cooling system with either our spindle or our laser tubes will not have any problems and we recommend using a small amount in locations where temperature is freezing or below.
Although we do not recommend using an entire gallon of anti-freeze rather just a small quantity with tap water will be sufficient.

Additional Information:


Additional Information:
All last winter, the temperature was below freezing and sometimes below zero. I used 100% antifreeze for the spindle coolant. Worked great !! All the spindle needs is any type of coolant flowing through it to take the heat away. I use three gallons of antifreeze in a tub with a fish-tank pump to push the antifreeze through. 100% antifreeze works great in cold or hot winter.

Additional Information:
Excellent tip. Thank you for this correction. So it is OK to use antifreeze solely as a cooling method.

Click the link to add information to this solution:
Can anti-freeze be used as a coolant for your 40W laser tube? I live where winter temperatures are below freezing and my CNC machine is in my unheated garage.

Yes, we can provide custom CNC travel lengths.

Additional Information:

Click the link to add information to this solution:
[127] Hey there, is there a way for a CNC customization with the following measurement: 47.75* 23.75'' *23.75

The greenBull 4X comes with all of the components and electronics to assemble the gantry of the machine. You will need to build the table. We provide the rails and roller chain for the X-axis (along the length of the table for full 8 feet of travel). You will need to provide some wire to connect the electronics and a computer to run the machine. You will also need to purchase the software that you will need to run the machine that matches how you will apply the machine. We suggest the mach3 control program. The CAM program is up to you as there are many options out there.

Click the link to add information to this solution:
I am interested in buying the greenBull 5X Long Z CNC Machine Kit, but it is not clear for me what is included in this kit. Is there anything else I need to get the machine work?