Been pretty busy over here. Hard to fit in the time, but I know it is an important video and I will start on it very soon. My apologies for the wait.

Additional Information:
I undersand. It looks like you're juggling a lot of balls over there I'm just really anxious to get this 5x machine up and running. Cheers.

Click the link to add information to this solution:
Hey Guys, Just checking in to see how part 2 for the following video was coming. Cheers. https://youtu.be/JWACS6dMMQ0

At this time we are working to release a new USB controller board that will be compatible with Mach4 software and do not have any immediate plans to update the Planet-CNC USB board.

Click the link to add information to this solution:
Are there plans to release a USB Controller to work with the Planet CNC Output Board for more advanced spindle control from within Planet CNC?

To assemble the blueChick v4.2, you will need two sets of instructions, the assembly instructions for the main body and mechanicals of the CNC machine, and the instructions to connect and test all of the electronics.

The assembly instructions are located at this URL towards the bottom of the page (click on each picture to get a larger view):

https://www.buildyourcnc.com/blueChickVersion42CNCMachineKit.aspx

The instructions to connect and test the electronics can be found at this URL:

https://www.buildyourcnc.com/CNCElectronicsandWiring.aspx

Click the link to add information to this solution:
I have a blueChick version 4.2 CNC Machine with no schematics for it is there anyway possibly i can get them so i can finish putting my cnc together

No, at this time, we do not offer any .dxf or any other type of file to cut the pieces for the DIY Combo #1. Just the directions that you are already able to access with the dimensions in them.

Additional Information:

Click the link to add information to this solution:
Are there .dxf files or other files for the MDF parts in Combo #1 so that they may be cut using a CNC?

Yes, with caveats. This kit includes a controller that will not be compatible, but if you use another type of controller that has web based control, you can use these electronics. Here is a list of web based control for CNC:

- Easel: The web-based software from Inventables can be accessed through Safari or other macOS-compatible web browsers.

- bCNC: A Python-based GRBL CNC command sender, although you may need to jump through some hoops to get it to run on macOS.

- Universal Gcode Sender: A Java-based software that should run on macOS if you have the Java Runtime Environment installed.

- CNCjs: Another web-based interface that you can run on macOS using Node.js.

Click the link to add information to this solution:
[50] Is there a software control package that will work with Axis Electronics Combo (For Heavy Gantry) for apple os.

A couple things to consider, the machine is most likely moving sideways, so the bristles won't be a problem. The lead screw has a very hight mechanical advantage and the bristles don't pose an issue with this. We have not found that the bristles cause any appreciable deflection to the work we do in our shop; however, you can change the brush for a more pliable plastic, or reduce the number of bristles by selectively pruning.

Click the link to add information to this solution:
THE DUST SHOE HAS STIFF BRISTLES, IS THERE PROBLEM WITH MOVING Z-AXIS DOWN SINCE BRISTLES PUSH AXIS SIDEWAYS

(These steps are to be taken with precaution, due to the fact that we do not know the model or manufacturers specifications for your BoB)

Here is a link to our CNC electronic videos(

Click the link to add information to this solution:
I have a CNC Machine from China, and the Breakout Board is not Labeled. Is there any way to test the board using Mach3 to find out the pin designations? db25 bob

We have manuals for the VFD rather than the spindles. Can you specify what issue you may be having so we can help you better?

Additional Information:
I am having trouble wiring the VFD. (From the wall outlet to the VFD) I think the manual or setup guide on your website is wrong. The two diagrams show two different sets of terminals on the page.

Also, do you have a video or other documentation on programming the VFD? Your videos and documentation looks like it only covers the 1.2kw version. Are the two different spindles from different manufacturers?

Click the link to add information to this solution:
Are there any other manuals for the VFD that comes with the 2.2kw spindle?

Our MAch3 USB interface boards can be located here:

https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach3-USB-Board

Click the link to add information to this solution:
Is the USB hub ready for use with Mach3 at this time, or just Planet CNC?

Unfortunately, we don't sell the planet-cnc controller anymore. They made a change to their software that prohibits us from creating the open source board.

We do sell three other boards that may work for you.

The Pokeys57CNC board is the mose feature rich and will work with both Mach3 and Mach4:
https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach4-mach3-USB-ethernet-Board

The MAch3 USB board is a good inexpensive interface that will work well if you need the interface to be USB only:
https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach3-USB-Board

Our in-house parallel breakout board (ytou need a parallel port for this interface to work):
https://www.buildyourcnc.com/item/electronicsAndMotors-parallel-breakout-relay
Most motherboards have the parallel port connector on the motherboard, but not as a connector on the back of the computer case.

Click the link to add information to this solution:
Do you sell the 3 axis electronics combo , for heavy gantry , with the new Planet CNC usb controller ?

What 3d printer do you have?

Additional Information:
whiteant

Click the link to add information to this solution:
HAVE 3D PRINTER THAT WANT TO MAKE CNC ROUTER ,IS THERE ANY GUIDES SHOW ME THE WAY

Our 1.5/2.2kW spindle will work with both setups, in our wiring diagram it is more seen as the Euro/AUS-style, however you can do the same thing with the North American style as well. Also depending on if you have single or three phase 220V, you can use pins R, S, T. A manual will arrive in the VFD box, which will have further information and diagrams.

Please seek a certified electrician if you are unsure of any aspect in wiring the spindle or VFD, since wiring to main lines will require wiring of the plug and main lines to the inverter and to avoid any damage or injury's while installing the 1.5/2.2kW spindle and VFD combo.

Click the link to add information to this solution:
On the wiring diagrams for the 220v inverters I noticed that there is one hot (220) a neutral and a ground. Will the inverter work with the American split phase system? Hot (120) hot (120) ground?

These machines are inherently dangerous. Before the machine moves, the machine should be clear of any person by a dimension of at the distance of a persons reach plus a few more feet. This is the policies we institute in our shop and what is recommend to all of our customers. Treat these machines as you would treat any major power tool in the shop.

With that said, you can certainly add some protective parts, but still keep folks away even with those installed. I would use the gantry side to do all of the mounting of the protective parts. Consider using sheet metal that you can bend and make a simple installation right on the gantry side.

Additional Information:

Click the link to add information to this solution:
THE CNC MACHINE IS UNSAFE WITH EXPOSED SPROCKETS THAT CAN DAMAGE FINGERS AND HAVE CLOTHING CAUGHT IN IT.

Ok, sure. Let's get the discussion started. Please respond with your questions on this FAQ

Click the link to add information to this solution:
Hi, I am thinking of making a CNC router that I can use in woodworking. I am very happy if you can help me with the necessary parts for this

If you select the Settings Page and select or tick Auto Limit Override - this will allow you to back off the switch.

Additional Information:
limit and home switch

Click the link to add information to this solution:
IS THERE A WAY TO GET RID OF THE PARALLEL CABLE AND SOMEHOW USE USB ?

We are currently getting it completed for us to post it under the 2.5A stepper driver page. However here is the correct wiring procedure.

First: Wire the 24V power supply to the 2.5A driver, by wiring +V on the power supply to 12-24V on the driver. Next wire the COM on the power supply to Ground(GND) on the 2.5A driver. GND on the driver will also go to the GND on the USB board, for specific axis. (additional 3-4 wires connected to ground will be needed for the other axes as well).

Second: Wire the USB board to the driver(one driver per axis on the USB board):
CP on the driver will go to CP on the desired axis on the USB board.
CW on the driver will go to CW on the desired axis on the USB board.
5V will go to the VCC pin on the keyboard jog pins on the USB board (check schematic here: https://buildyourcnc.com/item/electronicsAndMotors-electronic-component-USB-Controller-Breakout#prettyPhoto/2/).
GND on the USB board to GND on the driver. (as specified in step 1).
EN is not used.

Personal Note:
I would recommend that you crimp the VCC pin to a wire which could be split for the other axes as well, each driver will need 5V.

Third: Wire the stepper motor to the driver, (using either the Nema 23 100-oz or the Nema 17 62-oz stepper motors, the wiring will be the same. For the Nema 23 the yellow and white is not connected.)
Black to A1
Green to A2
Red to B1
Blue to B2

Fourth: Repeat steps 1-3 for each driver/motor per axis.

Mention: Remember that GND on the driver will also go to the GND on the USB board for specific axis, and VCC pin on the USB board (keyboard jog) will go to 5V on all drivers for each axes as well, each driver will need 5V!

Click the link to add information to this solution:
Is there a complete wiring diagram for the Medium Combo Kit with the usb board? Your USB tutorial does not cover the modular 2.5a drivers. https://buildyourcnc.com/item/electronicsAndMotors-3axis-100-elcombo

Portable cell phones emit about 0.6 watts of radiofrequency energy, limited primarily by the power of the battery. As with any radiofrequency transmitter, there will be some amount of absorption in the human body; the amount depends on how close you are to the antenna. The Federal Communications Commission (FCC) limits the amount of radiofrequency energy which cell phones can deposit in the body to levels at which no health effects are to be expected. See an article on Cell Phone Safety on this website for more information.

Gary H. Zeman, ScD, CHP

Click the link to add information to this solution:
HOW MUCH RADIATION GIVEN OFF BY A CELL PHONE AND THERE ANY WAY TO STOP THE FROM BEING ABSORBED INTO YOURSELF?

Yes, the kits that are available in the "Woodsmith CNC Kit" will work for their new plans version offered. I am working closely with Woodsmith magazine to make sure that the plans and the kits work seamllessly.

Click the link to add information to this solution:
[824] Will these kits work with the new Woodsmith plans for Shop-Made CNC Router 2.0

The greenBull 4X comes with all of the components and electronics to assemble the gantry of the machine. You will need to build the table. We provide the rails and roller chain for the X-axis (along the length of the table for full 8 feet of travel). You will need to provide some wire to connect the electronics and a computer to run the machine. You will also need to purchase the software that you will need to run the machine that matches how you will apply the machine. We suggest the mach3 control program. The CAM program is up to you as there are many options out there.

Click the link to add information to this solution:
I am interested in buying the greenBull 5X Long Z CNC Machine Kit, but it is not clear for me what is included in this kit. Is there anything else I need to get the machine work?