The plasma nozzle must be close to the cutting area and you will need some way to keep the nozzle at the right level with some type of device. The spray is downward, so you will need a contained area with a sheet of water at the bottom to extinguish he spray. You should have no problem using our machines for this application since you would need to product the table bed.

Click the link to add information to this solution:
CAN YOUR PRODUCTS OF MACHINES BE USED TO CREATE PLASMA TABLE?

For purchasing on our website, our account log in is a safe way to keep your personal data at hand for future orders. However we do not keep any bank information in our systems, it is a single use system.

Now dealing with the cnc book, you can view our web version of the book with a list of materials and hardware that will be needed here (https://www.buildyourcnc.com/cnckitintro.aspx).

Adding the items to your cart in the quantity's needed, now for certain items for example, or ACME screws, and aluminum angles will require a total length needed, but the specific lengths required will have to be email here (customerservice@buildyourcnc.com) or called here (281-815-7701) with the completion of your order.

Click the link to add information to this solution:
I want to purchase some items from your co. How do i go about it. I already have the buildyourcnc book and wand to begin.

Please call during business hours 9 AM through 5 PM Central Standard Time and you phone call will be answered. If it is not answered it is likely because there is another customer on the line. If you have left a voice mail, it will be returned once we are notified of it. Thank You

Click the link to add information to this solution:
I would like to speak with someone about your products. I have called and left voice mails.

We don't have a laser kit to retrofit another CNC router other than ours, but we can create one. Some things that may help:

- You are located close to use so we can work closely with you to implement to retrofit,
- or you can provide very detailed drawings or measurements so we can use them to create the necessary parts for the kit.

Other things that you need to understand:

- A laser has a number of parts that will bulk up the head of the CNC router causing a bit more inertia which may require lowering the acceleration for smooth ramping up and down of the velocity

- The bulk of the parts required for the laser may restrict the travel of the x and/or y axes.

- The nozzle of the laser will be offset from the end mill of the spindle.

Can you tell me the brand of the CNC router that you would like to stick a laser on? (you can answer by submitting additional information.

Click the link to add information to this solution:
Can I put a laser on my cnc router that I didn't purchase from buildyourcnc?

You can always come to our offices in Katy TX. If that is not an option, we can do cut in our shop and record video for you. Specify what you would like to cut and we can consider doing this for you.

Thanks. I've reviewed the gallery and think my question comes down to this- Can I do hardwood carving like Mike M.'s guitar display cases and cut 3/4 inch baltic birch plywood with the same machine?

Absolutely, the cutting and machining is more a function of how the machining operations are created and specified. Baltic birch is not a tough material and you will be able to cut very aggressively with any of our machine kits.

Click the link to add information to this solution:
Where is the best place to see projects made with BuildYourCNC CNCs? I would like to get an idea of carving capabilities and cutting Baltic Birch plywood. Thanks.

You can determine if the country is serviceable by:
- selecting the items you want to purchase on the website
- go to the cart (shopping cart top left of any webpage)
- log in, or register
- Enter the address and click on calculate shipping.

The webpage will return the direct rates and whether your area is serviced or not. Feel free to enter any address as long as you are able to receive the package from that address.

Click the link to add information to this solution:
Hi, very interested by your products to build my own CNC, I'm french, Can you deliver to France ? Thanks.

Yes, you can add a touch plate kit. A touch plate works just like a limit switch. All you need are alligator clips and a conductive plate. Solder a wire to the conductive plate material and connect that to an IN (input) terminal. Connect the alligator clip to the gnd of the input and then to the end mill. Enable the home setting for the Z axis in Mach3 or Mach4 and use the "ref all home" button to home all of the axes. The z axis will home at the touch plate. Make sure that the touch plate is under the end mill when the z-axis is in the homing process.

Here is a tutorial I made a while ago that explains this:
https://buildyourcnc.com/PrimeronHomingandLimitSwitches.aspx

Let me know what you think by click on the "submit response".

Thanks

Click the link to add information to this solution:
Do you offer a touch plate kit? If not can a touch plate kit be added to your machines if so whats the process?

Our machines can mill aluminum, we have only tested with thin aluminum sheets. But milling aluminum is no problem with our machines, here is a video we recently did with our gB 4'x8' the aluminum piece is about 1/4" thick: https://buildyourcnc.com/tutorials/tutorial-greenbull-aluminum-cutting

Click the link to add information to this solution:
Hello I just want to ask, is this machines can milling Aluminum?

There are two things to consider when using two stepping motors on a single axis. Since you want both motors to spin at the same rate and possibly in the same direction, you need to connect both motor drivers to the same breakout board pins. For example, if you want two motors on the x-axis and the x-axis pins on the breakout board are #2 for step and #3 for direction, the #2 will connect to the step (cp) terminal on each driver and the #3 will connect to the dir (cw) terminal on each driver.

However, if the motors will be opposing (one motor will need to spin in the other direction), you will need to consider either flipping the rack on one side, or adding a circuit to invert the direction (#3) signal going to that driver.

Click the link to add information to this solution:
I'm planning a rack and pinion style gantry, and need clarification on how to slave a second stepper to the Y (or X). Can you direct me to that information for your products?

You can determine if the area is serviceable by:
- selecting the items you want to purchase on the website
- go to the cart (shopping cart top left of any webpage)
- log in, or register
- Enter the address and click on calculate shipping.

The webpage will return the direct rates and whether your area is serviced or not. Feel free to enter any address as long as you are able to receive the package from that address.

Click the link to add information to this solution:
WAS WONDERING IF YOU COULD TELL ME WHETHER OR NOT SHIP ANY OF YOUR KIT PRODUCTS TO THE UK?

You can determine if the country is serviceable by:
- selecting the items you want to purchase on the website
- go to the cart (shopping cart top left of any webpage)
- log in, or register
- Enter the address and click on calculate shipping.

The webpage will return the direct rates and whether your area is serviced or not. Feel free to enter any address as long as you are able to receive the package from that address.

Click the link to add information to this solution:
CAN YOU SEND PRODUCTS TO MY COUNTRY?

CO2 lasers at the wattage we offer will not cut steel. However, if you are considering adding a spindle to the laser, then you can use that to cut the steel (similar to our spindle/laser combo head.

Click the link to add information to this solution:
I have built a 100% self designed 3d printer, I now want to build a laser cutter Cnc, will your products cut steel?

We would highly recommend using our forums to sell you machine buildyourtools.com.
We currently do not have a page or option to allow our customers to sell our machines, you can also contact us at customerservice@buildyourcnc.com, for further assistance dealing with the machine and in regards to selling it.

Click the link to add information to this solution:
I have a blueChick 13"x24" or 13"x36" Desktop CNC Router Kit v3.0 (Timing Belt) that I've assembled but never was able to get it running. Can BuildYourCNC assist me in selling this machine? Do you have used machine offerings on your site?

We provide a one year warranty from the date the item is delivered.

Click the link to add information to this solution:
What Is Your Service Any County Any Products

We are able to ship internationally but unfortunately we cannot control the shipping costs incurred for international customers. However, if you are associated with educational programs or Makerspaces and/or Fab Labs we do offer certain discounts in some cases. Please send an email to customer service for more information on receiving a quote.

Click the link to add information to this solution:
what options can you offered to international customers to assist in them building one of your machines? International shipping of a kit would be too expensive.

That is correct, the only manner to get our machines is to buy one of our kits. We do not provide or sell our plans, the only CNC machine you can find on our website will be the scratch build kit and plans which is a 20' x 40' , (https://buildyourcnc.com/Documents/CNC%20Kit%201-1.pdf).

Click the link to add information to this solution:
So the only way to get one of your machines is to buy it already cut, and/or assembled? I can't cut one on my existing machine?

You will probably have post processors like the following listed:
Mach2/3 ATC Arcs (inch)
Mach2/3 ATC Arcs (mm)
Mach2/3 Arcs (inch)
Mach2/3 Arcs (mm)
Mach2/3-WrapX2A ATC Arcs (inch)
Mach2/3-WrapX2A ATC Arcs (mm)
Mach2/3-WrapY2A ATC Arcs (inch)
Mach2/3-WrapY2A ATC Arcs (mm)

If you have an Automatic Tool Changer, use the post processor with the ATC in the name. For most applications and if you don't have an ATC (automatic tool changer), use the Mach2/3 Arcs (inch) or (mm) post processor.




Additional Information:

Click the link to add information to this solution:
I purchased Mach3 from buildyourcnc dont know what verson i need to use in VCarve as the processor. There are 8 2/3Mach listed

We provide a one year warranty from the date the item is delivered.

Click the link to add information to this solution:
WHAT IS THE WARRANTY ON YOUR PRODUCTS

Yes you can. We well the ArtCAM software and modules.

Click the link to add information to this solution:
I SEE ARTCAM MODULES ON YOUR SITE, CAN STILL GET THEM THROUGH YOU?