Unfortunately I am not able to give an estimate of shipping time. This is because there are multiple shipping options, Some of them cost more than others, but ensure the package arrives in a certain number of days. Others do not give a number of days, and many factors could change the length of shipping time, such as weather, or busy season. It would be best to choose an option you are comfortable with the price of, and then Google search the typical times it takes for that option to get to you, or call the shipping company and request that estimated time from them.

Additional Information:

Click the link to add information to this solution:
HOW LONG DOES IT TAKE TO SHIP

Should be the same day. Please call us if you don't receive the license in the same day.

Click the link to add information to this solution:
How long does it take to get my Mach3 license emailed to me?

We send out the Mach3 license on the same day unless the purchase was made on a weekend. You can call us anytime to expedite the license email.

Click the link to add information to this solution:
how long does it take to receive your MACH3 Lic??

There is no swapping between spindle and laser. The laser uses a separate output on the controller to be fired. For example, M3 g-code turns on the spindle; M7 g-code turns on the laser.

Click the link to add information to this solution:
[436] What is involved and how long does it take to swap between laser and spindle?

The easy way is to use Mach3's calibration process to calibrate the axis with the ballscrew coupled to the stepper motor. This is done in the settings tab of Mach3 and clicking the button just above the "Reset" button called "Set Steps Per Unit". A dialog box will appear asking how far you want Mach3 to move that axis. Mach3 will move that axis at a distance that is determined by the existing steps per unit value set in the motor tuning dialog box (config menu -> motor tuning). Not knowing the distance that this axis will travel, it's best to use a very small value.

The more difficult way and the technique that should be used to create the initial value for the step per unit in the motor tuning dialog box. Use the steps/unit formula. This example will use inches.

Steps/Inch
= ((motor natural steps) x microsteps) / (the travel for one complete revolution)

The travel for one revolution would be the distance a ball nut will travel with one complete turn of the ball screw. This is generally the number of starts / threads per inch. Say the ball screw has 5 starts (5 threads starting from the beginning of the screw) and 10 threads per inch (TPI), then the travel for one complete turn of the screw would be 5/10, or 1/2".

Say you set the microstepping to be 1/4 on the stepper motor driver and your stepper motor has 200 natural steps per revolution (1.8 degrees per step), then the total steps would be 200 x 4 = 800.

So, the steps/inch is 800 / 1/2" = 1600 steps per inch

Hope that helps

Click the link to add information to this solution:
how to calibrate stepper motors with ballscrews In mach3

Yes, we have the optional table for the blackToe, but we need to fabricate it, which only takes one day. We generally reserve one week for the total fabrication and packing of all parts.

Click the link to add information to this solution:
DO YOU HAVE BLACKTOE MACHINES WITH TABLES READY TO GO OR HOW LONG DOES IT TAKE MAKE ONE?

I will check

Additional Information:
The license was purchased and the developer is sending you the license shortly.

Click the link to add information to this solution:
How long does it take to receive the CamBam license I ordered? I purchased it yesterday 1/30/18

CNC kits normally take 5-7 business days but during busy periods this can increase.

Click the link to add information to this solution:
Hello, I purchased a cnc kit 3 days ago and I would like to know how long does it take to prepare a shipment? thanks

Yes, we honor a one year warranty on the NEMA 34 651 oz-in stepper motor.

Click the link to add information to this solution:
Is there a warranty on the NEMA 34 651 Oz-in stepper motors you sell?

I will check

Additional Information:
The license was purchased and the developer is sending you the license shortly.

Click the link to add information to this solution:
I ordered a 2.2kW spindle as a guest on March 3rd. How long does it take for you to provide shipping information?

Mach3 license purchases are processed during our working hours of 9 AM - 5 PM Central Standard Time, Monday through Friday. If you order after hours, licensed will generally be sent to your email address the following morning.

Click the link to add information to this solution:
I ordered a Mach3 license to be delivered by email, how long does that take to receive ?

The length of time it will take to build a CNC machine kit is not an easy answer. There may be a wide array of circumstances that limit a persons abilities to build the cnc machine kit in an efficient timeframe; however, if you have moderate dexterity and moderately mechanically inclined, you should have no problem building one of our machines within one weekend if the project has very little downtime.

Additional Information:

Click the link to add information to this solution:
HOW LONG WOULD IT TAKE FOR MY TO BUILD A MACHINE?

We will make sure that order is changed prior to shipping.

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
just placed an order for 2 nema 34 and 1 24 stepper motors i meant to have be 1, 34 and 2, 24 stepper motors. I need to change that before shipping

Wiring two motors in parallel is pretty easy.

Here are the steps:
- You need to have two stepper motors and two stepper motor drivers.
- Each stepper motor will be connected to its own stepper motor driver.
- Both stepper motor drivers are connected to the same CP and CW pins on the interface so the same signal is delivered to both drivers.

Additional Information:

Click the link to add information to this solution:
How do I wire to nema 23 motors parallel

Yes, the redLeaf is integrated into the redLeaf, all wired and configured. It is a plug and play system.

Click the link to add information to this solution:
replacing all electronic on a small cnc would like to use the redleaf hd +4 nema 34 motors does mach 3 included already installed

Machine sizes outside of what is selectable on the home page, or the machine product page require a special quote. You can text me at 832-477-0526 for a quote on a unique configuration.

Click the link to add information to this solution:
[593] I want this to be 12' long. how much does that cost?

Here is the formula for steps/inch (steps per inch)

Steps = how many steps for a full ration of the motor = standard motor steps x number of microsteps for each step
Standard motor steps for our stepping motors is 200 steps per revolution.
Microsteps are selected on the driver and are shown as full, 1/2, 1/4, 1/8, 1/16, 1/32 etc... Use the denominator for the number of microsteps per step.

Inches = how far the travel is for one full rotation of the motor. For the 1/2" - 13 TPI (threads per inch), the travel length will be 1"/13 or .076923". So, for one revolution of the motor, the travel distance will be .076923 inches.

So, the steps = 200 * microsteps, let's make this 1/4 just for the formula.
The inches will be .076923. Plug those into the formula:
Steps / inch = (200 * 4) / .076923 This can also be written as:
200 * 4 / (1 / 13) = 10,400



Additional Information:

Click the link to add information to this solution:
I am asking what to set my steps per using your kit stepper motors and a 1/2"x13 lead screw with Mach3

I will check

Additional Information:
The license was purchased and the developer is sending you the license shortly.

Click the link to add information to this solution:
Hello. I purchased a Mach 3 Pro License and have not received it yet. How long should it take to send me the access code ?

If your motors turn very slowly using your Mach3 USB board, then either the pulse from the board is being output at a slow rate or the motor drivers are set to a higher than expected microstepping:

The Mach3 USB board outputs the pulse rather than the computer, but Mach3 controls this pulse frequency within the motor tuning section. First, determine if the travel distance is correct with the computer and the physical travel of the machine.

If the travel is different, then your stepper motor driver's microstepping is incorrect, or the steps per inch/mm in the motor tuning within Mach3 is incorrect.

If the travel is correct, then simply change the velocity and acceleration parameters to your desired level. If Mach3 will not achieve the velocity you desire, then decrease your stepper motor driver's microstepping setting, readjust the step per inch/mm in mach3 and readjust the acceleration and velocity to your desired levels.

Additional Information:
Text is engraved in mirror image

Click the link to add information to this solution:
With the Mach3 USB board, my stepper motors are moving or spinning slowly.